Browsing Hungarian translation

69.

PURPOSE:
This test will check that you can use a BlueTooth HID device
STEPS:
1. Enable either a BT mouse or keyboard
2. Click on the bluetooth icon in the menu bar
3. Select 'Setup new device'
4. Look for the device in the list and select it
5. For mice, perform actions such as moving the pointer, right and left button clicks and double clicks
6. For keyboards, click the Test button to lauch a small tool. Enter some text into the tool and close it.
VERIFICATION:
Did the device work as expected?

100.

PURPOSE:
This test checks that a systems drive protection mechanism works properly.
STEPS:
1. Click on Test
2. Move the system under test around, ensuring it is raised and lowered at some point.
VERIFICATION:
The verification of this test is automated. Do not change the
automatically selected result.

105.

This test executes a maximum throughput test against all the ethernet devices found on the system.

106.

Automated test that tests performance of each wired network device under stress.

110.

PURPOSE:
This will verify that an ExpressCard slot can detect inserted devices.
STEPS:
Skip this test if you do not have an ExpressCard slot.
1. Plug an ExpressCard device into the ExpressCard slot
VERIFICATION:
Was the device correctly detected?

111.

PURPOSE:
This test will verify that a fingerprint reader will work properly for logging into your system. This test case assumes that there's a testing account from which test cases are run and a personal account that the tester uses to verify the fingerprint reader
STEPS:
1. Click on the User indicator on the left side of the panel (your user name).
2. Select "Switch User Account"
3. On the LightDM screen select your username.
4. Use the fingerprint reader to login.
5. Click on the user switcher applet.
6. Select the testing account to continue running tests.
VERIFICATION:
Did the authentication procedure work correctly?

116.

Automated tests for firmware using Firmware Test Suite.

124.

PURPOSE:
This test will verify the default display resolution
STEPS:
1. Click on Test to display the screen resolution overlay for 5 seconds.
VERIFICATION:
Is this acceptable for your display?

127.

PURPOSE:
This test will verify the display is operating at its maximum supported resolution
STEPS:
1. Consult the system's specifications and locate the screen's maximum supported resolution.
2. Click on Test to display the maximum resolution that can be used by Ubuntu on the current display.
VERIFICATION:
Is this the display's maximum resolution?

130.

Collect info on fresh rate.