|
18.
|
|
|
PURPOSE:
Check that system detects a microphone being plugged in ![](/@@/translation-newline)
STEPS:
1. Prepare a microphone with a standard 3.5mm jack
2. Locate the microphone jack on the device under test.
Keep in mind that it may be shared with the headphone jack.
3. Run the test (you have 30 seconds from now on)
4. Plug the microphone into the appropriate jack
5. Unplug the device for subsequent tests. ![](/@@/translation-newline)
VERIFICATION:
Verification is automatic, no action is required.
The test times out after 30 seconds (and fails in that case).
|
|
|
description
|
|
|
represents a line break.
Start a new line in the equivalent position in the translation.
|
|
|
represents a space character.
Enter a space in the equivalent position in the translation.
|
|
|
|
(no translation yet)
|
|
|
|
Located in
../jobs/audio.txt.in:265
|
|
19.
|
|
|
PURPOSE:
Check that balance control works correctly on internal speakers ![](/@@/translation-newline)
STEPS:
1. Check that moving the balance slider from left to right works smoothly
2. Click the Test button to play an audio tone for 10 seconds.
3. Move the balance slider from left to right and back.
4. Check that actual speaker audio balance follows your setting. ![](/@@/translation-newline)
VERIFICATION:
Does the slider move smoothly, as well as being followed by the setting by the actual audio output?
|
|
|
description
|
|
|
represents a line break.
Start a new line in the equivalent position in the translation.
|
|
|
represents a space character.
Enter a space in the equivalent position in the translation.
|
|
|
|
(no translation yet)
|
|
|
|
Located in
../jobs/audio.txt.in:289
|
|
20.
|
|
|
PURPOSE:
Check that balance control works correctly on external headphone ![](/@@/translation-newline)
STEPS:
1. Check that moving the balance slider from left to right works smoothly
2. Click the Test button to play an audio tone for 10 seconds.
3. Move the balance slider from left to right and back.
4. Check that actual headphone audio balance follows your setting. ![](/@@/translation-newline)
VERIFICATION:
Does the slider move smoothly, as well as being followed by the setting by the actual audio output?
|
|
|
description
|
|
|
represents a line break.
Start a new line in the equivalent position in the translation.
|
|
|
represents a space character.
Enter a space in the equivalent position in the translation.
|
|
|
|
(no translation yet)
|
|
|
|
Located in
../jobs/audio.txt.in:310
|
|
21.
|
|
|
Test to detect audio devices after suspending 30 times.
|
|
|
description
|
|
|
|
Hangeszközök felismerésének tesztelése 30 alkalommal történő felfüggesztés után.
|
|
Translated and reviewed by
Balázs Úr
|
|
|
|
Located in
../jobs/audio.txt.in:329
|
|
22.
|
|
|
PURPOSE:
This test will check that internal speakers work correctly after suspending 30 times. ![](/@@/translation-newline)
STEPS:
1. Make sure that no external speakers or headphones are connected
If testing a desktop, external speakers are allowed
2. Click the Test button to play a brief tone on your audio device ![](/@@/translation-newline)
VERIFICATION:
Did you hear a tone?
|
|
|
description
|
|
|
represents a line break.
Start a new line in the equivalent position in the translation.
|
|
|
represents a space character.
Enter a space in the equivalent position in the translation.
|
|
|
|
CÉL:
Ez a teszt azt ellenőrzi, hogy a belső hangszórók megfelelően működnek-e 30 alkalommal történő felfüggesztés után. ![](/@@/translation-newline)
LÉPÉSEK:
1. Győződjön meg arról, hogy nincs külső hangszóró vagy fejhallgató csatlakoztatva
Ha asztalit tesztel, akkor a külső hangszórók engedélyezettek
2. Nyomja meg a Teszt gombot egy rövid dallam lejátszásához a hangeszközön ![](/@@/translation-newline)
ELLENŐRZÉS:
Hallotta a dallamot?
|
|
Translated and reviewed by
Balázs Úr
|
|
|
|
Located in
../jobs/audio.txt.in:341
|
|
23.
|
|
|
Play back a sound on the default output and listen for it on the default input, after suspending 30 times.
|
|
|
description
|
|
|
|
Hang visszajátszása az alapértelmezett kimeneten, és annak figyelése az alapértelmezett bemeneten, 30 alkalommal történő felfüggesztés után.
|
|
Translated and reviewed by
Balázs Úr
|
|
|
|
Located in
../jobs/audio.txt.in:364
|
|
24.
|
|
|
This test will verify that the volume levels are at an acceptable level on your local system. The test will validate that the volume is greater than or equal to minvol and less than or equal to maxvol for all sources (inputs) and sinks (outputs) recognized by PulseAudio. It will also validate that the active source and sink are not muted. You should not manually adjust the volume or mute before running this test.
|
|
|
description
|
|
|
|
Ez a teszt azt ellenőrzi, hogy a hangerők elfogadható szinten vannak-e a helyi rendszeren. A teszt azt fogja ellenőrizni, hogy a hangerő nagyobb vagy egyenlő a legkisebb hangerőnél, valamint kisebb vagy egyenlő a legnagyobb hangerőnél a PulseAudio által felismert összes forrásnál (bemenetek) és az összes elnyelőnél (kimenetek). Azt is ellenőrizni fogja, hogy az aktív forrás és elnyelő nincs-e némítva. Nem szabad kézzel állítania a hangerőt vagy lenémítani a teszt futtatása előtt.
|
|
Translated and reviewed by
Balázs Úr
|
|
|
|
Located in
../jobs/audio.txt.in:376
|
|
25.
|
|
|
Record mixer settings after suspending 30 times.
|
|
|
description
|
|
|
|
Keverő beállításának rögzítése 30 alkalommal történő felfüggesztés után.
|
|
Translated and reviewed by
Balázs Úr
|
|
|
|
Located in
../jobs/audio.txt.in:391
|
|
26.
|
|
|
Benchmark for each disk
|
|
|
description
|
|
|
|
Teljesítményteszt minden lemezen
|
|
Translated by
Gabor Kelemen
|
|
|
|
Located in
../jobs/benchmarks.txt.in:18
|
|
27.
|
|
|
Run gtkperf to make sure that GTK based test cases work
|
|
|
description
|
|
|
|
Gtkperf futtatása a GTK alapú tesztek működésének megbizonyosodásához
|
|
Translated by
Gabor Kelemen
|
|
|
|
Located in
../jobs/benchmarks.txt.in:35
|