Browsing Malay translation

596.

PURPOSE:
Tests that the systems wireless hardware can connect to a router using WPA
security and the 802.11ac protocol.
STEPS:
1. Open your router's configuration tool
2. Change the settings to only accept connections with the 802.11ac protocol.
3. Make sure the SSID is set to ROUTER_SSID
4. Change the security settings to use WPA2 and ensure the PSK matches that set in ROUTER_PSK
5. Click the 'Test' button to create a connection to the router and test the connection
VERIFICATION:
Verification is automated, do not change the automatically selected result.

597.

PURPOSE:
Tests that the systems wireless hardware can connect to a router using
no security and the 802.11ac protocol.
STEPS:
1. Open your routers configuration tool
2. Change the settings to only accept connections with the 802.11ac protocol.
3. Make sure the SSID is set to ROUTER_SSID
4. Change the security settings to use no security
5. Click the 'Test' button to create a connection to the router and test the connection
VERIFICATION:
Verification is automated, do not change the automatically selected result.

602.

Automated test that tests performance of each wireless network device under stress.

604.

Test that the MAC80211 modules are loaded and wireless extensions are working.

605.

PURPOSE:
This test will check whether or not your driver responds to rfkill commands.
STEPS:
1. Use the hardware switch on the side of your device to switch off wireless.
2. If you do not have a hardware switch disable wireless from the network manager icon in the panel
3. Click "Test" to verify that the hard or soft blocks are in place.
VERIFICATION:
Did the hard or soft blocks show on in the dialog?

606.

This test executes a maximum throughput test against all the wireless devices found on the system.

709.

Ethernet Device Test

719.

Device Agnostic Network Test