Browsing English (United Kingdom) translation

105.

%s is already running (pid %

1202.

This represents the identity of the connection used for various purposes. It allows to configure multiple profiles to share the identity. Also, the stable-id can contain placeholders that are substituted dynamically and deterministically depending on the context. The stable-id is used for generating IPv6 stable private addresses with ipv6.addr-gen-mode=stable-privacy. It is also used to seed the generated cloned MAC address for ethernet.cloned-mac-address=stable and wifi.cloned-mac-address=stable. It is also used to derive the DHCP client identifier with ipv4.dhcp-client-id=stable, the DHCPv6 DUID with ipv6.dhcp-duid=stable-[llt,ll,uuid] and the DHCP IAID with ipv4.iaid=stable and ipv6.iaid=stable. Note that depending on the context where it is used, other parameters are also seeded into the generation algorithm. For example, a per-host key is commonly also included, so that different systems end up generating different IDs. Or with ipv6.addr-gen-mode=stable-privacy, also the device's name is included, so that different interfaces yield different addresses. The per-host key is the identity of your machine and stored in /var/lib/NetworkManager/secret_key. See NetworkManager(8) manual about the secret-key and the host identity. The '$' character is treated special to perform dynamic substitutions at activation time. Currently, supported are "${CONNECTION}", "${DEVICE}", "${MAC}", "${BOOT}", "${RANDOM}". These effectively create unique IDs per-connection, per-device, per-boot, or every time. The "${CONNECTION}" uses the profile's connection.uuid, the "${DEVICE}" uses the interface name of the device and "${MAC}" the permanent MAC address of the device. Any unrecognized patterns following '$' are treated verbatim, however are reserved for future use. You are thus advised to avoid '$' or escape it as "$$". For example, set it to "${CONNECTION}-${BOOT}-${DEVICE}" to create a unique id for this connection that changes with every reboot and differs depending on the interface where the profile activates. If the value is unset, a global connection default is consulted. If the value is still unset, the default is "default${CONNECTION}" go generate an ID unique per connection profile.

1328.

The InfiniBand p-key to use for this device. A value of -1 means to use the default p-key (aka "the p-key at index 0"). Otherwise, it is a 16-bit unsigned integer, whose high bit 0x8000 is set if it is a "full membership" p-key. The values 0 and 0x8000 are not allowed. With the p-key set, the interface name is always "$parent.$p_key". Setting "connection.interface-name" to another name is not supported. Note that kernel will internally always set the full membership bit, although the interface name does not reflect that. Usually the user would want to configure a full membership p-key with 0x8000 flag set.

1338.

A string containing the "Identity Association Identifier" (IAID) used by the DHCP client. The string can be a 32-bit number (either decimal, hexadecimal or as colon separated hexadecimal numbers). Alternatively it can be set to the special values "mac", "perm-mac", "ifname" or "stable". When set to "mac" (or "perm-mac"), the last 4 bytes of the current (or permanent) MAC address are used as IAID. When set to "ifname", the IAID is computed by hashing the interface name. The special value "stable" can be used to generate an IAID based on the stable-id (see connection.stable-id), a per-host key and the interface name. When the property is unset, the value from global configuration is used; if no global default is set then the IAID is assumed to be "ifname". For DHCPv4, the IAID is only used with "ipv4.dhcp-client-id" values "duid" and "ipv6-duid" to generate the client-id. For DHCPv6, note that at the moment this property is only supported by the "internal" DHCPv6 plugin. The "dhclient" DHCPv6 plugin always derives the IAID from the MAC address. The actually used DHCPv6 IAID for a currently activated interface is exposed in the lease information of the device.

1344.

DNS options for /etc/resolv.conf as described in resolv.conf(5) manual. The currently supported options are "attempts", "debug", "edns0", "ndots", "no-aaaa", "no-check-names", "no-reload", "no-tld-query", "rotate", "single-request", "single-request-reopen", "timeout", "trust-ad", "use-vc". See the resolv.conf(5) manual. Note that there is a distinction between an unset (default) list and an empty list. In nmcli, to unset the list set the value to "". To set an empty list, set it to " ". Currently, an unset list has the same meaning as an empty list. That might change in the future. The "trust-ad" setting is only honored if the profile contributes name servers to resolv.conf, and if all contributing profiles have "trust-ad" enabled. When using a caching DNS plugin (dnsmasq or systemd-resolved in NetworkManager.conf) then "edns0" and "trust-ad" are automatically added. The valid "ipv4.dns-options" and "ipv6.dns-options" get merged together.

1352.

The IPv4 connection method.

1360.

Configure method for creating the IPv6 interface identifer of addresses with RFC4862 IPv6 Stateless Address Autoconfiguration and Link Local addresses. The permitted values are: "eui64" (0), "stable-privacy" (1), "default" (3) or "default-or-eui64" (2). If the property is set to "eui64", the addresses will be generated using the interface token derived from hardware address. This makes the host part of the address to stay constant, making it possible to track the host's presence when it changes networks. The address changes when the interface hardware is replaced. If a duplicate address is detected, there is also no fallback to generate another address. When configured, the "ipv6.token" is used instead of the MAC address to generate addresses for stateless autoconfiguration. If the property is set to "stable-privacy", the interface identifier is generated as specified by RFC7217. This works by hashing a host specific key (see NetworkManager(8) manual), the interface name, the connection's "connection.stable-id" property and the address prefix. This improves privacy by making it harder to use the address to track the host's presence and the address is stable when the network interface hardware is replaced. The special values "default" and "default-or-eui64" will fallback to the global connection default as documented in the NetworkManager.conf(5) manual. If the global default is not specified, the fallback value is "stable-privacy" or "eui64", respectively. If not specified, when creating a new profile the default is "default". Note that this setting is distinct from the Privacy Extensions as configured by "ip6-privacy" property and it does not affect the temporary addresses configured with this option.

1363.

A IPv6 address followed by a slash and a prefix length. If set, the value is sent to the DHCPv6 server as hint indicating the prefix delegation (IA_PD) we want to receive. To only hint a prefix length without prefix, set the address part to the zero address (for example "::/60").

1364.

DNS options for /etc/resolv.conf as described in resolv.conf(5) manual. The currently supported options are "attempts", "debug", "edns0", "ndots", "no-aaaa", "no-check-names", "no-reload", "no-tld-query", "rotate", "single-request", "single-request-reopen", "timeout", "trust-ad", "use-vc" and "inet6", "ip6-bytestring", "ip6-dotint", "no-ip6-dotint". See the resolv.conf(5) manual. Note that there is a distinction between an unset (default) list and an empty list. In nmcli, to unset the list set the value to "". To set an empty list, set it to " ". Currently, an unset list has the same meaning as an empty list. That might change in the future. The "trust-ad" setting is only honored if the profile contributes name servers to resolv.conf, and if all contributing profiles have "trust-ad" enabled. When using a caching DNS plugin (dnsmasq or systemd-resolved in NetworkManager.conf) then "edns0" and "trust-ad" are automatically added. The valid "ipv4.dns-options" and "ipv6.dns-options" get merged together.

1366.

The IPv6 connection method.